碱度对熔剂性球团生球性能的影响

 熔剂性铁矿球团具有优良的高温冶金性能，是高炉炼铁的优质炉料。为探明生产熔剂性铁矿球团时碱度对生球性能的影响规律，以某钢厂赤铁精矿为原料，通过添加石灰石粉调节碱度，进行了造球及生球干燥特性试验研究。结果发现，提高碱度，生球落下强度呈提高趋势，抗压强度变化不明显，适宜膨润土配比略有下降，生球爆裂温度明显提高，生球干燥速率则没有明显变化。与基准自然碱度（R＝0.14）相比，当碱度提高到0.6以上时，适宜膨润土配比由1.2%下降到1.1%，生球爆裂温度提高近50 ℃以上。     

Template-assisted spray-drying method for the fabrication of porous particles with tunable structures

Developing strategies for the production of porous particles with controllable structures using a spray-drying method has attracted attention of researchers for decades. Although many papers have reported their successful production of porous particles using this method, information on how to create and control the porous structures as well as what parameters involving and what formation mechanism occurring during the synthesis process are still not clear. To meet these demands, the present review covers strategies in the spray-drying developments for the fabrication of porous particles with controllable structure. This information is important for optimizing the production of porous particles with desirable properties. Regulation of process conditions and precursor formulations are also explained, including composition, type, and physicochemical properties of droplet and raw components used (i.e., host component, template, and solvent). The electrostatic interactions between the individual components and the droplets are also presented, while this information tends to be neglected in the conventional spray-drying process. To clarify how the porous particles are designed, current experimental results completed with illustrations for the proposal particle formation mechanism are presented. The review also completed with the opportunities and potential roles of the changing porous structures in practical uses. This review would provide information on how to produce porous particles that can be used for advanced functional materials, such as catalysts, adsorbents, and sensors.     

基于跨临界CO2热泵的茶叶生产能源系统负荷削减潜力

乡村产业中的化石能源设备逐渐被电能技术替代，引起了乡村负荷波动增大、部分时段产生集中高负荷的问题。为了解决以上问题，将低品位清洁能源应用至乡村的茶叶生产中，针对烘茶全过程的工艺要求提出了跨临界CO₂热泵烘茶技术；并以某茶叶生产乡村为对象，对其代表台区的全年日用电量及产茶日负荷进行了分析，得出采用CO₂热泵烘茶后其负荷得到大幅度削减，整体可降低至原负荷的39.6%~46.8%，峰值负荷与平时负荷的比值由原本的13.6降至5.4~6.2。跨临界CO₂热泵应用至农产品生产中可有效缓解乡村供电压力。     

Effects of feed composition,protein denaturation and storage of milk serum protein/lactose powders on lactosylation

During whey powder production, the feed is subjected to several heat treatments which can cause lactosylation of proteins. In this study, lactosylation of whey proteins was evaluated in spray-dried powders before and after storage by varying the native protein fraction as well as the serum protein/lactose ratio in the powders. The lactosylation of native α-lactalbumin and β-lactoglobulin in the powders before storage was not affected to a large extent by the protein denaturation or if the feed had been heat treated in a high or low lactose environment. After storage (relative humidity of 23.5%, 30 °C, 25 days), the kinetic of lactosylation tended to increase with increasing native protein fraction and bulk protein content in the powders. An explanation could be that proteins dissolved in the lactose glassy structure might have a lower reactivity, while proteins present in the protein glassy structure with dissolved lactose may display higher lactosylation reactivity.     

Moulded pulp products manufacturing with thermoforming

For an effective optimization of pulp thermoforming and of the moulded pulp products manufactured by this process, a full understanding of the process physics combined with full knowledge of the pressing equipment is necessary. For this reason, in this Addendum, we clarify how the process parameters “Holding time,” “Vacuum time,” “Cycle time,” and “Temperature” were interpreted and subsequently defined for the analysis of the process and product‐related outputs of the thermoforming experiments.     

小截面长隧道窑生产潜力的认识

详细介绍了小截面直通道一次码烧长干燥焙烧隧道窑的结构特点及优点。     

Influence of soil density on gas permeability and water retention in soils amended with in-house produced biochar

Biochar has been used as an environment-friendly enhancer to improve the hydraulic properties(e.g.suction and water retention) of soil.However,variations in densities alter the properties of the soil-biochar mix.Such density variations are observed in agriculture(loosely compacted) and engineering(densely compacted) applications.The influence of biochar amendment on gas permeability of soil has been barely investigated,especially for soil with diffe rent densities.The maj or obj ective of this study is to investigate the water retention capacity,and gas permeability of biochar-amended soil(BAS) with different biochar contents under varying degree of compaction(DOC) conditions.In-house produced novel biochar was mixed with the soil at different amendment rates(i.e.biochar contents of 0%,5% and 10%).All BAS samples were compacted at three DOCs(65%,80% and 95%) in polyvinyl chloride(PVC)tubes.Each soil column was subjected to drying-wetting cycles,during which soil suction,water content,and gas permeability were measured.A simplified theoretical framework for estimating the void ratio of BAS was proposed.The experimental results reveal that the addition of biochar significantly decreased gas permeability k_g as compared with that of bare soil(BS).However,the addition of 5%biochar is found to be optimum in decreasing kg with an increase of DOC(i.e.k_(g,65%) k_(g,80%) k_(g,95%)) at a relatively low suction range(200 kPa) because both biochar and compaction treatment reduce the connected pores.     

HVOF制备MCrAlY涂层过程中WC杂质颗粒的演变遗传行为研究

在热喷涂工业生产过程中,喷涂制备不同材料体系的涂层之前需要对送粉路径(送粉罐、送粉盘、搅拌器、送粉管路、送粉针)进行清理,但由于送粉路径内部结构复杂且存在静电吸附效应,使得残留于喷涂系统的粉末无法被完全去除,通常以微量杂质颗粒的形式被带入新涂层,进而影响新涂层的性能。为此,本文研究了在单晶基材表面采用高速火焰(HVOF)喷涂制备MCrAlY涂层过程中,送粉路径残留的WC杂质颗粒(WC-10Co4Cr)在涂层及涂层与基材界面处的遗传演变行为,分别采用SEM、EDS分析了WC杂质在喷涂态、热处理态涂层中的微观组织和相组成。研究结果表明,WC杂质颗粒确实存在于MCrAlY涂层中,并在后期热处理及氧化试验中进一步分解而固溶于涂层中,甚至扩散至单晶基材内部引起含W碳化物的生成,影响涂层及单晶基材的显微组织,改变局部的成分均匀性。同时,本文还采用ThermoCalc软件进行了热力学计算模拟,辅助分析了WC分解及W与C元素在显微组织中的遗传特性。对于WC类粉末和MCrAlY粉末共用的HVOF喷涂设备,建议给MCrAlY粉末配备单独的送粉路径,以确保涂层的纯净度与质量。     

气瓶内部淬火过程的流动换热特性

 大直径厚壁气瓶内部淬火时的流动换热过程极其复杂，受到多种因素的影响，而研究气瓶内部压强和温度的变化规律对改善流动换热效果、提高产品组织性能具有重要的理论指导意义。以914 mm厚壁气瓶和瓶内流体为研究对象，建立了二维等效流 固耦合模型；采用多喷嘴系统对气瓶内外进行喷水淬火，研究了气瓶总长、喷水流速及淬火时间对瓶内压强及内壁温度的影响，通过间歇淬火试验验证了数学模型的正确性。结果发现，气瓶长度对瓶内压强和瓶壁温度的影响显著，喷水流速次之，当喷水流速大于8 m/s后，水量对瓶壁的冷却效果大大降低；气瓶内壁长度方向的温度梯度分别随气瓶总长的增加和淬火时间的延长而减小，但基本不受喷水量的影响。     

300M超高强钢在中性盐雾环境中的腐蚀行为及机制

摘要：为了研究300M超高强钢在中性盐雾环境中的腐蚀行为及腐蚀机制，采用失重法，宏观、微观腐蚀形貌分析，三维表面轮廓分析及电化学分析的研究方法，来表征腐蚀实验现象并进行分析。结果表明：300M超高强钢在中性盐雾环境中的腐蚀产物为FeOOH、Fe2O3、Fe(OH)3和Fe3O4；腐蚀速率随着腐蚀时间逐渐降低，腐蚀后期（72h）腐蚀速率降低50%；腐蚀初期以点蚀为主，点蚀坑通过横向扩展，逐渐发展为后期的均匀腐蚀，腐蚀表面形貌呈沟壑状；外腐蚀层对基体的保护能力很弱，Cr元素在锈层靠近基体的一侧偏聚使内腐蚀层具有一定的抗腐蚀性。